Many people have asked us about the difference between a femtocell, sometimes called a microcell, and a cell phone signal booster, like this Home 4G. Both can improve your cell coverage, but they operate differently. This post breaks down the differences for you.
How a Femtocell / Microcell Works
A femtocell is a low-power base station that works with your broadband Internet connection to enhance cell phone coverage by creating a signal source, a “micro” cell site, inside your home. For consumer use, the coverage area is typically a single room.
Voice and data traffic moves across your cell carrier’s network and is delivered to the femtocell via an Internet gateway. Your phone communicates directly with the femtocell, which typically has a range up to about 50 feet.
Residential femto models usually support up to four or five simultaneous connections, while enterprise models can support a dozen or more.
These devices can create a signal inside even if there is absolutely no cellular signal outside.
They may provide a faster connection for data than typical cellular signals.
Depending on the device model, can cover anywhere from a single room up to an entire building.
Femtocells rely on high speed internet which is not available everywhere.
Your cell phone will drop the connection if you move out of femtocell range. If you’re on a call or downloading, you must remain within range until you are finished with your call or download.
Femtocells will only support cellular devices for one specific carrier. Anyone who uses a different carrier cannot benefit from a femotcell’s improved cell service.
To benefit from a femtocell, cellular devices must be synched to the femto. That means family members, roommates or coworkers with unsynched phones can’t benefit from your improved cell service.
There could be additional monthly charge on your cell service provider’s bill for the femtocell equipment.
Femtocells use your internet connection’s bandwidth to operate, and so could possibly slow other Internet traffic.
Femtocells will not work in a vehicle.
How a Cell Signal Booster Works
A cell signal booster works by detecting the cell signal outside a building, bringing it inside and amplifying it, and then rebroadcasting the amplified signal to the interior space so your phone can use it.
These systems are bi-directional, meaning that it will also help your cell phone communicate with the tower using the same process in reverse order. Cell phone booster systems can be used to boost the signal in weak signal areas and inside buildings where cellular signals can’t penetrate..
Signal boosters operate independently from your Internet connection.
Connections are maintained and “handed off” when the cell phone switches from receiving signal through the signal booster to receiving signal from the cell tower, and vice versa.
You buy the equipment once, with no monthly reoccurring charge.
Booster systems almost always work with multiple carriers.
Boosters typically work with all cell devices within range, no synching required.
Boosters support multiple cellular devices operating simultaneously across multiple carriers.
Various models of vehicle boosters are available for cars, trucks and RVs.
Signal boosters help conserve battery life.
Signal Booster Cons
Booster systems do not create cellular signal. They enhance existing signal. If there is no detectable cellular signal, a booster system will not work. However, a signal can be too weak for your phone to detect, but still be picked up by the ultra-sensitive receivers of a signal booster.